Arduino - GSMVCSGetVoiceCallStatus

GSM : GSMVoiceCall class

getVoiceCallStatus()

Description

Returns status of the voice call.

Syntax

voice.getVoiceCallStatus()

Parameters

none

Returns

char : IDLE_CALL, CALLING, RECEIVINGCALL, TALKING

Example

// libraries
#include <GSM.h> // PIN Number
#define PINNUMBER "" // initialize the library instance
GSM gsmAccess; // include a 'true' parameter for debug enabled
GSMVoiceCall vcs;
char numtel[ 20 ] ; // buffer for the incoming call void setup ( )
{
// initialize serial communications
Serial.begin ( 9600 ) ;
Serial.println ( "Receive Voice Call" ) ; // connection state
boolean notConnected = true ; // Start GSM shield
// If your SIM has PIN, pass it as a parameter of begin() in quotes
while (notConnected)
{
if (gsmAccess.begin (PINNUMBER) ==GSM_READY)
notConnected = false ;
else
{
Serial.println ( "Not connected" ) ;
delay ( 1000 ) ;
}
} // This makes sure the modem notifies correctly incoming events
vcs.hangCall ( ) ; Serial.println ( "Waiting Call" ) ;
} void loop ( )
{
// Check the status of the voice call
switch (vcs.getvoiceCallStatus ( ) )
{
case IDLE_CALL: // Nothing is happening break ; case CALLING: // This should never happen, as we are not placing a call Serial.println ( "CALLING" ) ;
break ; case RECEIVINGCALL: // Yes! Someone is calling us Serial.println ( "RECEIVING CALL" ) ; // Retrieve the calling number
vcs.retrieveCallingNumber (numtel, 20 ) ; // Print the calling number
Serial.print ( "Number:" ) ;
Serial.println (numtel) ; // Answer the call, establish the call
vcs.answerCall ( ) ;
break ; case TALKING: // In this case the call would be established Serial.println ( "TALKING. Enter line to interrupt." ) ;
while ( Serial.read ( ) != '\n' )
delay ( 100 ) ;
vcs.hangCall ( ) ;
Serial.println ( "HANG. Waiting Call." ) ;
break ;
}
delay ( 1000 ) ;
}