Arduino - GSMSMSBeginSMS

GSM : GSM_SMS class

beginSMS()

Description

Identifies the telephone number to send an SMS message to.

Syntax

SMS.beginSMS(number)

Parameters

number : char array, the phone number to send the SMS to

Returns

int
In asynchronous mode, beginSMS() returns 0 if the last command is still executing, 1 if success, and >1 if there is an error. In synchronous mode, it returns 1 if it successfully executes, and 0 if it does not.

Example

#include <GSM.h> #define PINNUMBER "" // initialize the library instance
GSM gsmAccess; // include a 'true' parameter for debug enabled
GSM_SMS sms; void setup ( )
{
// initialize serial communications
Serial.begin ( 9600 ) ; Serial.println ( "SMS Messages Sender" ) ; // connection state
boolean notConnected = true ; // Start GSM shield
// If your SIM has PIN, pass it as a parameter of begin() in quotes
while (notConnected)
{
if (gsmAccess.begin (PINNUMBER) ==GSM_READY)
notConnected = false ;
else
{
Serial.println ( "Not connected" ) ;
delay ( 1000 ) ;
}
} Serial.println ( "GSM initialized" ) ;
} void loop ( )
{ Serial.print ( "Enter a mobile number: " ) ;
char remoteNumber[ 20 ] ; // telephone number to send sms
readSerial(remoteNumber) ;
Serial.println (remoteNumber) ; // sms text
Serial.print ( "Now, enter SMS content: " ) ;
char txtMsg[ 200 ] ;
readSerial(txtMsg) ;
Serial.println ( "SENDING" ) ;
Serial.println ( ) ;
Serial.println ( "Message:" ) ;
Serial.println (txtMsg) ; // send the message
sms.beginSMS (remoteNumber) ;
sms.print (txtMsg) ;
sms.endSMS ( ) ;
Serial.println ( "\nCOMPLETE!\n" ) ;
} /*
Read input serial
*/
int readSerial( char result[ ] )
{
int i = 0 ;
while ( 1 )
{
while ( Serial.available ( ) > 0 )
{
char inChar = Serial.read ( ) ;
if (inChar == '\n' )
{
result[i] = '\0' ;
Serial.flush ( ) ;
return 0 ;
}
if (inChar!= '\r' )
{
result[i] = inChar;
i++;
}
}
}
}