Home Page | Language Reference (extended) | SD Reference | Libraries | Comparison | Changes

WiFi101

WiFi.status()

Description

Return the connection status.

Syntax

WiFi.status();

Parameters

none

Returns

• WL_CONNECTED: assigned when connected to a WiFi network;
• WL_NO_SHIELD: assigned when no WiFi shield is present;
• WL_IDLE_STATUS: it is a temporary status assigned when WiFi.begin() is called and remains active until the number of attempts expires (resulting in WL_CONNECT_FAILED) or a connection is established (resulting in WL_CONNECTED);
• WL_NO_SSID_AVAIL: assigned when no SSID are available;
• WL_SCAN_COMPLETED: assigned when the scan networks is completed;
• WL_CONNECT_FAILED: assigned when the connection fails for all the attempts;
• WL_CONNECTION_LOST: assigned when the connection is lost;
• WL_DISCONNECTED: assigned when disconnected from a network;

Example

#include <SPI.h>
#include <WiFi101.h> char ssid[ ] = "yourNetwork" ;                     // your network SSID (name)
char key[ ] = "D0D0DEADF00DABBADEAFBEADED" ;       // your network key
int keyIndex = 0 ;                                // your network key Index number
int status = WL_IDLE_STATUS;                     // the Wifi radio's status void setup ( ) {
  //Initialize serial and wait for port to open:
  Serial.begin ( 9600 ) ;
  while ( ! Serial ) {
    ; // wait for serial port to connect. Needed for Leonardo only
  }   // check for the presence of the shield:
  if (WiFi.status ( ) == WL_NO_SHIELD) {
    Serial.println ( "WiFi shield not present" ) ;
    // don't continue:
    while ( true ) ;
  }   // attempt to connect to Wifi network:
  while ( status != WL_CONNECTED) {
    Serial.print ( "Attempting to connect to WEP network, SSID: " ) ;
    Serial.println (ssid) ;
    status = WiFi.begin (ssid, keyIndex, key) ;     // wait 10 seconds for connection:
    delay ( 10000 ) ;
  }   // once you are connected :
  Serial.print ( "You're connected to the network" ) ;
} void loop ( ) {
  // check the network status connection once every 10 seconds:
  delay ( 10000 ) ;
 Serial.println (WiFi.status ( ) ;
}

Reference Home

Corrections, suggestions, and new documentation should be posted to the Forum.

The text of the Arduino reference is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.